Buenas noches.
Queria consultarlos por un problema que tengo con mi grabadora de DVD LG, la cual compre 0km hace casi 3 años. La misma la uso constantemente ya que soy coleccionista de films. Hasta aqui todo en orden.
La semana pasada me empezo a tirar un error al grabar los films con el Nero Express 6(El cual uso hace muchos años), los films los grabo como DVD de datos por una cuestion de espacio.
El error consta de que cada 5 o 6 films que me grabo en el DVD, 1 no se ve, al finalizar la grabacion el programa me indica como "Failed"
Como primer paso cambie la marca de los Dvd, y nada mismo problema. Como segundo siguiendo el post que indica como limpìar la Lectora de Dvd, hice lo alli explicado y nada.
Bueno al terminarse las opciones paso a requerir su ayuda, espero haber sido bastante claro ya que es la primera vez que posteo en mi vida.
Les envio el informe que me da el Nero al finalizar, a ver si con eso consigo solucionar el problema.
Desde ya muchas gracias.
P667
1A20-020E-0010-1727-0457-3471*
1A20-620E-0012-2525-1283-2378*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 19/12/2005 05:16:04 a.m.
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4165B>Version: DL05 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4165B>Version: DL05 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00JHC0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4165B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4165B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 61MB (63072kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.7.2009
Compilación ISO
12:09:37 p.m. #1 Text 0 File Isodoc.cpp, Line 6368
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:09:37 p.m. #2 Text 0 File Reader.cpp, Line 127
Reader running
12:09:37 p.m. #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4165B running
12:09:37 p.m. #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:09:37 p.m. #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:09:38 p.m. #6 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2146911 (477:05.36, 4193MB)
12:09:38 p.m. #7 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)
12:09:38 p.m. #8 Text 0 File DlgWaitCD.cpp, Line 2489
Recorder: HL-DT-ST DVDRAM GSA-4165B, Media type: DVD-R
Disc Manufacturer: MBI 01 - RG40
Disc Application Code: 64, Disc Physical Code: 193
12:09:38 p.m. #9 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:09:38 p.m. #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2146912 (2146912) = #2146912/477:5.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2146912 blocks [HL-DT-ST DVDRAM GSA-4165B]
--------------------------------------------------------------
12:09:38 p.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4165B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4396875776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2146912 | lead-out | 1 | 0x41 | 0x00
12:09:38 p.m. #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:09:38 p.m. #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:09:38 p.m. #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:09:38 p.m. #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
12:09:38 p.m. #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:09:38 p.m. #17 Text 0 File DVDR.cpp, Line 2579
Recording mode: Sequential Recording Mode for Multisession
12:09:38 p.m. #18 Text 0 File Mmc.cpp, Line 21820
Set BUFE: Buffer underrun protection -> ON
12:09:38 p.m. #19 Text 0 File DVDR.cpp, Line 2734
Start write address at LBA 0
DVD high compatibility mode: Yes
12:09:38 p.m. #20 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:16:41 p.m. #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4165B> start writing Lead-Out at LBA 2146912 (20C260h), lenght 0 blocks
12:16:42 p.m. #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:16:42 p.m. #23 Text 0 File DVDR.cpp, Line 2977
EndDAO: Last written address was 2146911
12:16:48 p.m. #24 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
12:17:20 p.m. #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11.080 KB/s)
12:17:20 p.m. #26 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
12:17:26 p.m. #27 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 0 to 1 on disc are different to source
12:17:26 p.m. #28 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 3 on disc has different content to source
12:17:26 p.m. #29 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 5 on disc has different content to source
12:17:26 p.m. #30 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 7 on disc has different content to source
12:17:26 p.m. #31 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 15 to 27 on disc are different to source
12:19:12 p.m. #32 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 31 to 358505 on disc are different to source
12:20:38 p.m. #33 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 358509 to 716673 on disc are different to source
12:20:38 p.m. #34 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 716675 on disc has different content to source
12:20:38 p.m. #35 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 716677 on disc has different content to source
12:20:38 p.m. #36 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 716679 on disc has different content to source
12:21:50 p.m. #37 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 716702 to 1073876 on disc are different to source
12:21:50 p.m. #38 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 1073878 on disc has different content to source
12:22:55 p.m. #39 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 1073880 to 1431374 on disc are different to source
12:22:55 p.m. #40 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 1431376 on disc has different content to source
12:22:55 p.m. #41 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 1431378 to 1431379 on disc are different to source
12:23:54 p.m. #42 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 1431382 to 1789895 on disc are different to source
12:23:54 p.m. #43 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 1789897 on disc has different content to source
12:24:49 p.m. #44 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 1789899 to 2146755 on disc are different to source
12:24:49 p.m. #45 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146757 on disc has different content to source
12:24:49 p.m. #46 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146759 on disc has different content to source
12:24:49 p.m. #47 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 2146784 to 2146785 on disc are different to source
12:24:49 p.m. #48 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146787 on disc has different content to source
12:24:49 p.m. #49 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146789 on disc has different content to source
12:24:49 p.m. #50 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146791 on disc has different content to source
12:24:49 p.m. #51 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 2146816 to 2146817 on disc are different to source
12:24:49 p.m. #52 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146819 on disc has different content to source
12:24:49 p.m. #53 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146821 on disc has different content to source
12:24:49 p.m. #54 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146823 on disc has different content to source
12:24:49 p.m. #55 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 2146848 to 2146849 on disc are different to source
12:24:49 p.m. #56 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146851 on disc has different content to source
12:24:49 p.m. #57 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146853 on disc has different content to source
12:24:50 p.m. #58 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146855 on disc has different content to source
12:24:50 p.m. #59 SectorVerify 10 File Cdrdrv.cpp, Line 10032
Sectors from 2146880 to 2146881 on disc are different to source
12:24:50 p.m. #60 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146883 on disc has different content to source
12:24:50 p.m. #61 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146885 on disc has different content to source
12:24:50 p.m. #62 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:24:50 p.m. #63 SectorVerify 11 File Cdrdrv.cpp, Line 10032
Sector 2146887 on disc has different content to source
12:24:50 p.m. #64 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25/08/2006 12:47:00 a.m.
File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 20/11/2008 04:19:06 p.m. (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 13/04/2008 03:40:30 p.m. (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
que error mas jodido che!!! prueba separando y dejando la grabadora "sola" en 1 puerto IDE y asegurate de que tenga un cable de 80 pines.