Hola gente, les comento el problema que estoy teniendo, uso Kubuntu 9.10 con los efectos de Kwin activos y cuando muevo horizontalmente una ventana rápido (ventanas gelatinosas) o un vídeo tienen mucho movimiento la imagen se corta (horizontalmente). No posteo una captura porque la hdp sale bien.... o por lo menos las que saque. También he notado que ocasionalmente una que otra ventana o el menú K por ejemplo no se refresca, tengo que minimizarla y maximizarla nuevamente.
También me pasa que no se muestra correctamente la frecuencia del procesador.
Les comento los datos de mi pc:
Micro: AMD Phenom II 920 X4 2.8GHz
Placa madre: ASUS M3N78-EM (GeForce 8300 512MB memoria compartida)
Memoria: 4GB 2x2GB Dual Channel 1066mhz ddr2
Monitor: Dell 2209WA (22" Wide)
Los datos de sistema (y que arroja el sistema):
Linux florencia 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:53:52 UTC 2009 x86_64 GNU/Linux
vendor_id : AuthenticAMD
vendor_id : AuthenticAMD
vendor_id : AuthenticAMD
vendor_id : AuthenticAMD
model name : AMD Phenom(tm) II X4 920 Processor
model name : AMD Phenom(tm) II X4 920 Processor
model name : AMD Phenom(tm) II X4 920 Processor
model name : AMD Phenom(tm) II X4 920 Processor
cpu MHz : 800.000
cpu MHz : 800.000
cpu MHz : 2800.000
cpu MHz : 800.000
Acá por ejemplo toma un solo núcleo a 2800 y otras veces muestra los cuatro a 800 ¿?
Inicié con un Live-Cd de openSUSE y mostraba los 4 800MHz.
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8300] (rev a2)
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
H/W path Device Class Description
=============================================
system System Product Name
/0 bus M3N78-EM
/0/0 memory 64KiB BIOS
/0/3 processor AMD Phenom(tm) II X4 920 Processor
/0/3/5 memory 512KiB L1 cache
/0/3/6 memory 2MiB L2 cache
/0/3/7 memory 6MiB L3 cache
/0/3a memory 4GiB System Memory
/0/3a/0 memory 2GiB DIMM DDR2 Synchronous 1066 MHz (0.9 ns)
/0/3a/1 memory 2GiB DIMM DDR2 Synchronous 1066 MHz (0.9 ns)
/0/3a/2 memory DIMM [empty]
/0/3a/3 memory DIMM [empty]
/0/4 memory RAM memory
/0/1 bridge MCP78S [GeForce 8200] LPC Bridge
/0/1.1 bus MCP78S [GeForce 8200] SMBus
/0/1.2 memory RAM memory
/0/1.3 processor MCP78S [GeForce 8200] Co-Processor
/0/1.4 memory RAM memory
/0/2 bus MCP78S [GeForce 8200] OHCI USB 1.1 Controller
/0/2.1 bus MCP78S [GeForce 8200] EHCI USB 2.0 Controller
/0/5 bus MCP78S [GeForce 8200] OHCI USB 1.1 Controller
/0/4.1 bus MCP78S [GeForce 8200] EHCI USB 2.0 Controller
/0/6 storage MCP78S [GeForce 8200] IDE
/0/7 multimedia MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio
/0/8 bridge MCP78S [GeForce 8200] PCI Bridge
/0/9 scsi0 storage MCP78S [GeForce 8200] SATA Controller (non-AHCI mode)
/0/9/0 /dev/cdrom disk DVDRAM GH22NS40
/0/9/1 /dev/sda disk 750GB SAMSUNG HD753LJ
/0/9/1/1 /dev/sda1 volume 114GiB Windows NTFS volume
/0/9/1/2 /dev/sda2 volume 38GiB EXT4 volume
/0/9/1/3 /dev/sda3 volume 7812MiB Linux swap volume
/0/9/1/4 /dev/sda4 volume 537GiB EXT4 volume
/0/a eth0 network MCP77 Ethernet
/0/b bridge MCP78S [GeForce 8200] PCI Express Bridge
/0/b/0 display C77 [GeForce 8300]
/0/10 bridge MCP78S [GeForce 8200] PCI Express Bridge
/0/12 bridge MCP78S [GeForce 8200] PCI Express Bridge
/0/13 bridge MCP78S [GeForce 8200] PCI Bridge
/0/13/0 bus IEEE 1394 Host Controller
/0/100 bridge K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
/0/101 bridge K10 [Opteron, Athlon64, Sempron] Address Map
/0/102 bridge K10 [Opteron, Athlon64, Sempron] DRAM Controller
/0/103 bridge K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
/0/104 bridge K10 [Opteron, Athlon64, Sempron] Link Control
/1 vboxnet0 network Ethernet interface
Module Size Used by
vboxnetadp 93452 0
vboxnetflt 100460 0
vboxdrv 1708684 1 vboxnetflt
snd_hda_codec_nvhdmi 6048 1
snd_hda_codec_realtek 277860 1
snd_hda_intel 31880 2
snd_hda_codec 87584 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 9352 1 snd_hda_codec
snd_pcm_oss 44704 0
snd_mixer_oss 18976 1 snd_pcm_oss
snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 3460 0
snd_seq_oss 33440 0
snd_seq_midi 8192 0
snd_rawmidi 27360 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 60608 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 26992 2 snd_pcm,snd_seq
snd_seq_device 8308 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
iptable_filter 3872 0
ip_tables 21200 1 iptable_filter
soundcore 9088 1 snd
snd_page_alloc 10928 2 snd_hda_intel,snd_pcm
lp 11908 0
asus_atk0110 9472 0
ppdev 8232 0
parport_pc 37352 1
psmouse 57124 0
serio_raw 6596 0
amd64_edac_mod 26688 0
i2c_nforce2 8168 0
nvidia 10316904 36
joydev 13088 0
x_tables 25832 1 ip_tables
edac_core 48876 1 amd64_edac_mod
parport 40528 3 lp,ppdev,parport_pc
shpchp 37756 0
hid_pl 4064 0
ff_memless 6504 1 hid_pl
usbhid 43968 1 hid_pl
usb_storage 65984 0
ohci1394 33780 0
ieee1394 100896 1 ohci1394
floppy 65192 0
forcedeth 61292 0
video 23612 0
output 3680 1 video
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
rtc
direct rendering: Yes
GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
6688 frames in 5.0 seconds
6890 frames in 5.0 seconds
7012 frames in 5.0 seconds
6889 frames in 5.0 seconds
6916 frames in 5.0 seconds
6989 frames in 5.0 seconds
6995 frames in 5.0 seconds
6704 frames in 5.0 seconds
6803 frames in 5.0 seconds
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 862 requests (862 known processed) with 0 events remaining.
Antes, cuando usaba Gnome (Ubuntu) con compiz, quizás pasaba esto, pero con la ventana normal, a modo de pantalla completa se veían bien los vídeos. Lo del refresco de ventanas no recuerdo, y el tema del micro nunca lo llegue a ver.
Los efectos de Kwin están con las opciones predeterminadas. Por último los paquetes nvidia instalados y activados:
i nvidia-185-kernel-source
i A nvidia-185-libvdpau
p nvidia-185-libvdpau-dev
i nvidia-185-modaliases
Y por último:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Tue Oct 20 21:25:04 PDT 2009
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL 2209WA"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
# HorizSync source: edid, VertRefresh source: edid
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "TwinView" "0"
Option "metamodes" "1680x1050_60 +0+0; 1680x1050 +0+0; nvidia-auto-select +0+0"
DefaultDepth 24
# Removed Option "metamodes" "1680x1050 +0+0; 1680x1050_60 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
# generated from default
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8300"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Desde ya muchas gracias!"
Tu micro está en modo "ahorro de energía" o "dinámico", haciendo que sea el sistema el que según la carga del momento cambie la frecuencia de operación de cada núcleo.
Instalá kpowersave y jugá con sus configuraciones. Cada vez que cambies de configuración fijate en la frecuencia de trabajo de cada núcleo. En el modo "rendimiento" deberías tener 2800 en cada uno de los núcleos.
Si te gusta jugar con la consola, el mismo trabajo puedes hacerlo con cpufreqd y cpufrecutils (si la memoria no me falla).
Saludos.
Muchas gracias por el dato del micro, haber gastado en ese micro y que no lo detecte como se debe me ponía bastante mal, ahora tendría que ver a que carajo se debe que los vídeos se vean mal, de última siempre puedo deshabilitar los efectos antes de mirar algo, pero... preferiría una solución. Saludos!"
La calidad de reproducción también depende de qué dispositivo de video se está usando.
Si usas mplayer/smplayer/kaffeine probá con varios:
shm
x
opengl
opengl2
...
No todos tienen el mismo rendimiento.
En mplayer/smplayer/kmplayer estoy usando "gl2" (mplayer -vo=gl2 y mplayer -vo help)
En kaffeine con el motor xine estoy usando "xshm".
Saludos.