Buenas noches.
Queria consultarlos por un problema que tengo con mi grabadora de DVD LG, la cual compre 0km hace casi 3 años. La misma la uso constantemente ya que soy coleccionista de films. Hasta aqui todo en orden.
La semana pasada me empezo a tirar un error al grabar los films con el Nero Express 6(El cual uso hace muchos años), los films los grabo como DVD de datos por una cuestion de espacio.
El error consta de que cada 5 o 6 films que me grabo en el DVD, 1 no se ve, al finalizar la grabacion el programa me indica como "Failed"
Como primer paso cambie la marca de los Dvd, y nada mismo problema. Como segundo siguiendo el post que indica como limpìar la Lectora de Dvd, hice lo alli explicado y nada.
Bueno al terminarse las opciones paso a requerir su ayuda, espero haber sido bastante claro ya que es la primera vez que posteo en mi vida.
Les envio el informe que me da el Nero al finalizar, a ver si con eso consigo solucionar el problema.
Desde ya muchas gracias.
P667

1A20-020E-0010-1727-0457-3471*
1A20-620E-0012-2525-1283-2378*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 19/12/2005 05:16:04 a.m.
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19
(Nero Express)
Recorder:             <HL-DT-ST DVDRAM GSA-4165B>Version: DL05 - HA 1 TA 0 - 6.6.0.19
Adapter driver:      <atapi>                   HA 1
Drive buffer  :      2048kB
Bus Type      :      default (0) -> ATAPI, detected: ATAPI
CD-ROM:               <HL-DT-ST DVDRAM GSA-4165B>Version: DL05 - HA 1 TA 0 - 6.6.0.19
Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : SAMSUNG SP0411N                  atapi Port 0 ID 0  DMA: On
DiskPeripheral       : WDC WD800BB-00JHC0               atapi Port 0 ID 1  DMA: On
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4165B        atapi Port 1 ID 0  DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4165B  E:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 255MB (261616kB)
Free physical memory: 61MB (63072kB)
Memory in use       : 75 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.7.2009
Compilación ISO
12:09:37 p.m.   #1 Text 0 File Isodoc.cpp, Line 6368
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : FALSE
   Multisession            : TRUE
   Multisession type:      : Start multisession
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : FALSE
   Allow more than 255 characters in path  : FALSE
   Write ISO9660 ;1 file extensions        : TRUE
   
12:09:37 p.m.   #2 Text 0 File Reader.cpp, Line 127
   Reader running
   
12:09:37 p.m.   #3 Text 0 File Writer.cpp, Line 122
   Writer HL-DT-ST DVDRAM GSA-4165B running
   
12:09:37 p.m.   #4 ISO9660GEN -11 File geniso.cpp, Line 3309
   First writeable address = 0 (0x00000000)
   
12:09:37 p.m.   #5 Text 0 File Burncd.cpp, Line 3233
   Turn on Disc-At-Once, using DVD media
   
12:09:38 p.m.   #6 Text 0 File DlgWaitCD.cpp, Line 272
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2146911 (477:05.36, 4193MB)
   
12:09:38 p.m.   #7 Text 0 File DlgWaitCD.cpp, Line 284
   Write in overburning mode: NO (enabled: CD)
   
12:09:38 p.m.   #8 Text 0 File DlgWaitCD.cpp, Line 2489
   Recorder: HL-DT-ST DVDRAM GSA-4165B, Media type: DVD-R
    Disc Manufacturer: MBI 01 - RG40
    Disc Application Code: 64, Disc Physical Code: 193
   
12:09:38 p.m.   #9 Text 0 File DlgWaitCD.cpp, Line 450
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
12:09:38 p.m.   #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2146912 (2146912) = #2146912/477:5.37
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2146912 blocks [HL-DT-ST DVDRAM GSA-4165B]
   --------------------------------------------------------------
   
12:09:38 p.m.   #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
   Prepare recorder [HL-DT-ST DVDRAM GSA-4165B] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4396875776, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2146912 | lead-out |   1 |    0x41 | 0x00
   
12:09:38 p.m.   #12 Phase 24 File dlgbrnst.cpp, Line 1832
   Caching of files started
   
12:09:38 p.m.   #13 Text 0 File Burncd.cpp, Line 4122
   Cache writing successful.
   
12:09:38 p.m.   #14 Phase 25 File dlgbrnst.cpp, Line 1832
   Caching of files completed
   
12:09:38 p.m.   #15 Phase 36 File dlgbrnst.cpp, Line 1832
   Burn process started at 8x (11.080 KB/s)
   
12:09:38 p.m.   #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
12:09:38 p.m.   #17 Text 0 File DVDR.cpp, Line 2579
   Recording mode: Sequential Recording Mode for Multisession
   
12:09:38 p.m.   #18 Text 0 File Mmc.cpp, Line 21820
   Set BUFE: Buffer underrun protection -> ON
   
12:09:38 p.m.   #19 Text 0 File DVDR.cpp, Line 2734
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
12:09:38 p.m.   #20 Text 0 File Cdrdrv.cpp, Line 8926
   ---- DVD Structure: Physical Format Information (00h) ----
   Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      26127F h
    End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: 2FE10 h
     Start sector number of the next Border-In:     2FFA0 h
    Media Specific [16..63]:
         00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
         00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
12:16:41 p.m.   #21 Text 0 File WriterStatus.cpp, Line 116
   <HL-DT-ST DVDRAM GSA-4165B> start writing Lead-Out at LBA 2146912 (20C260h), lenght 0 blocks
   
12:16:42 p.m.   #22 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
12:16:42 p.m.   #23 Text 0 File DVDR.cpp, Line 2977
   EndDAO: Last written address was 2146911
   
12:16:48 p.m.   #24 Phase 133 File dlgbrnst.cpp, Line 1832
   Writing short lead-out
   
12:17:20 p.m.   #25 Phase 37 File dlgbrnst.cpp, Line 1832
   Burn process completed successfully at 8x (11.080 KB/s)
   
12:17:20 p.m.   #26 Phase 78 File dlgbrnst.cpp, Line 1832
   Data verification started
   
12:17:26 p.m.   #27 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 0 to 1 on disc are different to source
   
12:17:26 p.m.   #28 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 3 on disc has different content to source
   
12:17:26 p.m.   #29 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 5 on disc has different content to source
   
12:17:26 p.m.   #30 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 7 on disc has different content to source
   
12:17:26 p.m.   #31 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 15 to 27 on disc are different to source
   
12:19:12 p.m.   #32 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 31 to 358505 on disc are different to source
   
12:20:38 p.m.   #33 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 358509 to 716673 on disc are different to source
   
12:20:38 p.m.   #34 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 716675 on disc has different content to source
   
12:20:38 p.m.   #35 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 716677 on disc has different content to source
   
12:20:38 p.m.   #36 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 716679 on disc has different content to source
   
12:21:50 p.m.   #37 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 716702 to 1073876 on disc are different to source
   
12:21:50 p.m.   #38 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 1073878 on disc has different content to source
   
12:22:55 p.m.   #39 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 1073880 to 1431374 on disc are different to source
   
12:22:55 p.m.   #40 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 1431376 on disc has different content to source
   
12:22:55 p.m.   #41 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 1431378 to 1431379 on disc are different to source
   
12:23:54 p.m.   #42 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 1431382 to 1789895 on disc are different to source
   
12:23:54 p.m.   #43 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 1789897 on disc has different content to source
   
12:24:49 p.m.   #44 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 1789899 to 2146755 on disc are different to source
   
12:24:49 p.m.   #45 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146757 on disc has different content to source
   
12:24:49 p.m.   #46 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146759 on disc has different content to source
   
12:24:49 p.m.   #47 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 2146784 to 2146785 on disc are different to source
   
12:24:49 p.m.   #48 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146787 on disc has different content to source
   
12:24:49 p.m.   #49 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146789 on disc has different content to source
   
12:24:49 p.m.   #50 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146791 on disc has different content to source
   
12:24:49 p.m.   #51 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 2146816 to 2146817 on disc are different to source
   
12:24:49 p.m.   #52 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146819 on disc has different content to source
   
12:24:49 p.m.   #53 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146821 on disc has different content to source
   
12:24:49 p.m.   #54 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146823 on disc has different content to source
   
12:24:49 p.m.   #55 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 2146848 to 2146849 on disc are different to source
   
12:24:49 p.m.   #56 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146851 on disc has different content to source
   
12:24:49 p.m.   #57 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146853 on disc has different content to source
   
12:24:50 p.m.   #58 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146855 on disc has different content to source
   
12:24:50 p.m.   #59 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 2146880 to 2146881 on disc are different to source
   
12:24:50 p.m.   #60 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146883 on disc has different content to source
   
12:24:50 p.m.   #61 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146885 on disc has different content to source
   
12:24:50 p.m.   #62 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
12:24:50 p.m.   #63 SectorVerify 11 File Cdrdrv.cpp, Line 10032
   Sector 2146887 on disc has different content to source
   
12:24:50 p.m.   #64 Phase 81 File dlgbrnst.cpp, Line 1832
   Data verification failed
   

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25/08/2006 12:47:00 a.m.
File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 20/11/2008 04:19:06 p.m. (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 13/04/2008 03:40:30 p.m. (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

que error mas jodido che!!!  prueba separando y dejando la grabadora "sola" en 1 puerto IDE y asegurate de que tenga un cable de 80 pines.

Fijate en este punto:

2:17:20 p.m.   #25 Phase 37 File dlgbrnst.cpp, Line 1832
   Burn process completed successfully at 8x (11.080 KB/s)

Hasta ahi todo bien o sea que te lo grabo joya a 8x...pero el problema comienza inmediatamente despues cuando lo analiza al dvd en busca de algo malo:

12:17:20 p.m.   #26 Phase 78 File dlgbrnst.cpp, Line 1832
   Data verification started

Y comienza con los errores:

12:17:26 p.m.   #27 SectorVerify 10 File Cdrdrv.cpp, Line 10032
   Sectors from 0 to 1 on disc are different to source

Diciendote que en el sector X del disco YA GRABADO, es diferente al archivo original a grabar ( te compara bit por bit del archivo original con lo que ya esta grabado en el disco a ver si existe algo malo Y ES AHI DONDE COMIENZAN A SALTAR LOS ERRORES).

Proba desactivando la comprobacion del disco luego de grabar ( toy seguro que debe tener una opcion asi).Con eso nero solo grabaria la informacion en el dvd y listo...si esta bien o mal  eso te lo deja a vos que lo analices ( o sea graba el dvd sin comprobar luego de que este todo ok y despues saca el dvd y fijate si anda todo joya).Yo tengo NERO 7 y nunca uso eso de "Verificar los datos en el disco luego de grabar".

Andrés

Solucionado el problema
Agradezco a las dos personas que me contestaron y a  los que leyeron el post.
Al final lo pude solucionar desinstalando el Nero 6
y descargando con la Mula el Nero 7 (asi de simple)
Desde ya nuevamente gracias.

OK masculino Gracias a vos por dar la solucion 


saludos